Subject: | |
From: | |
Reply To: | |
Date: | Fri, 27 Sep 1996 00:46:43 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Michael L Gueterman ([log in to unmask]) wrote:
: The 5.5 Communicator has a good Technical article on the
: Network Printing functionality available. That, along with
: Native Mode spooler manual on the LaserRom were enough
: to get everything setup and running within 30 minutes
: (I actually took the time to READ the articles, and
: that is included in the 30 minutes!). There are also
: a couple of sample files in PUB.SYS that you can look
: at for examples. I basically copied the first sample
: into NPCONFIG, made a few editing changes and was done.
: (You do have to setup an LDEV via SYSGEN first though).
I'm glad you found it so straightforward; that's what we
were aiming for. I hope everyone else does as well.
I just wanted to modify your final (parenthetical)
statement. You *can* configure the LDEV with SYSGEN, but
this requires you to reboot the box -- no change there.
However, you can use the IOCONFIG utility (also new with
5.5) to configure your device with the system up and
running. It then takes effect immediately (no reboot
required). The new configuration is written through to
the system configuration files, so it will continue to be
effective following a reboot.
-Larry "been there, done that, got the printout" Byler-
|
|
|