Open up the DB25 connector on the printer and put a jumper from pin 6 to pin
20. The printer will then supply its own DTR signal.
If its a DB9 connector you will want to jump 4 and 6.
Doug.
Doug Werth Beechglen Development Inc.
[log in to unmask] Cincinnati, Ohio
----- Original Message -----
From: "Nizzardini, Al" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, February 12, 2001 12:16 PM
Subject: Zebra printers
> I have a 979 on 5.5 power patch 7. Connect to a DTC72 we have about 60
Zebra
> printers (95's, 105's and 170's). According to HP the DTC does not support
> DTR which the Zebra's need. Is there a work around for this?
>
> Thank you,