Subject: | |
From: | |
Reply To: | Johnson, Tracy |
Date: | Fri, 3 Aug 2001 13:41:38 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have two hosts using the same DTC.
I have both hosts configured with the same LDEV to the same DTC.
I have both hosts configured with the same MAC address to the same DTC.
I have both hosts using the same PROFILE in NMMGR (o.k. it is't the
'same' PROFILE, but all the parameters are exactly equal.)
Both PROFILEs are set up for 2 hosts and both NMMGRs say the
ports are enabled in the SWITCH menu.
I've reset the DTC and made sure only one system downloads the
configuration. (HP said to make sure it happens this way.)
The catch. One system is supported, the other is not,
(contractually.)
On one system sometimes the printers work, sometimes they don't.
I have another DTC configured in the same manner with the same
hosts. The other printer on the other DTC works fine for both
hosts.
What am I missing?
Tracy Johnson
MSI Schaevitz Sensors
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|