Normally there is no need to suspend mirroring for a failed
disk drive. The system should have realized a drive is
missing from a mirrored pair and sent a message to the
console. The mirroring would have automatically been disabled
for the affected pair. Use :mirvutil then showset (set_name) mirror
to confirm. When you reply to the operator request you will
stop getting the console messages. You will need to manually
replacemirrvol after you replace the hardware to rebuild the
mirror.

                 Bob J. -- Ideal Computer Services
                 http://www.icsgroup.net



Kent Stelter wrote:
> Our HP 979 needs some help. 
> 
> When I was rebooting it Monday.  Receive this error:
> 
> Bad System Logical Sector number 0x3ad0 on LDEV 32
> 
> Removed the drive and system came up fine as drive is software mirrored.
> 
> Try to suspendmirrvol on pending drive and system goes DEAD immediately.
> 
> Can anyone help?
> 
> Kent Stelter
> Lead Operator
> RCU
> PO Box 970
> Eau Claire, WI 54702
> Office 715-833-8116
> Cell 715-579-5996
> [log in to unmask]
>  
> Confidentiality Notice: This email and any attachments, if applicable,
> is intended for only the addressee(s) named above.  It contains
> information that is privileged, confidential, or otherwise protected
> from use and disclosure.  If you are not an intended recipient, you are
> hereby notified that any review, disclosure, copying or dissemination of
> this transmission or taking of any action in reliance on its contents,
> or other use is strictly prohibited.  If you have received this email in
> error, please notify us immediately by phone.  Thank you for your
> cooperation.
>  
>  
> 
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> 
> 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *