Looks like it is set to 10 MB.  But it also looks like you have autosensing
enabled.  If you can nail the card to 100 MB (and the switch/hub/whatever)
also to 100 you're much better off.  I've always had trouble getting a 100
MB card get 100 MB if it has autoswitching enabled.

-------------------------------------------------------------
Gary L. Paveza, Jr.
Technical Services Manager
(302) 761-3173 - voice
(800) 217-5808 - pager

        -----Original Message-----
        From:   Kevin O'Sullivan [SMTP:[log in to unmask]]
        Sent:   Wednesday, July 19, 2000 6:52 AM
        To:     [log in to unmask]
        Subject:        [HP3000-L] LinkControl Stats (bit long)

        Hi fellow listers,

        Given the output of a LINKCONTROL NSLINK;STATUS=ALL command shown
below,
        could someone tell me if our interface card is running at 10mbs or
100mbs.

        I can see the link speed value set to 10 so I'm thinking maybe
10mbs.

        If so, any thoughts on why it's not running at 100mbs.

        The card is connected to a 10/100 mbs switch port configured at
100mbs and
        the switch port and the card both show indicators to the effect of a
100mbs
        link being established.

        ----------------------

        Linkname: NSLINK    Linktype: 100BT     Linkstate: CONNECTED
        Physical Path:              32
        Current Station Address:    00-10-83-96-D0-F4
        Default Station Address:    00-10-83-96-D0-F4
        Current Multicast Addresses:
         09-00-09-00-00-01

        Transmit bytes             4175182330    Receive bytes
        2419566885
        Transmits                    25648006    Receives
        17110212
        Transmits no error           25644661    Receives broadcast
        9271268
        Transmits dropped                   0    Receives multicast
        1321
        Transmits deferred               3266    Receives no error
        27026230
        Transmits 1 retry                2419    CRC or Maxsize error
        737
        Transmits >1 retry                 40    Code or Align error
        547
        Trans 16 collisions                 0    Recv dropped: addr
        643424
        Trans late collision             3312    Recv dropped: buffer
        3
        Trans underruns                     0    Recv dropped: dma
        0
        Carrier losses                     33    Recv dropped: other
        2
        Link disconnects                    2    Recv deferred
        0
        Link speed                         10    Recv overruns
        10959
        Link duplex                      Half    Link auto sensed
        Yes
        Link mode                  100Base-TX    Secs since clear
        3957309

        Thanks for all and any help,

        Kevin


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
        - Kevin O'Sullivan                        Cosworth Racing Limited,
-
        - Racing Systems Department               The Octagon,
-
        -                                         St James Mill Road,
-
        -                                         Northampton, England,
-
        -                                         NN5 5RA.
-
        -                                         Tel: +44 (0) 1604 598488
-
        - mailto:[log in to unmask] Fax: +44 (0) 1604 598506
-

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
        The views expressed above are mine entirely and in no way represent
        those of my employer.




****************************************************************************
****
        This email and any files transmitted with it are confidential and
        intended solely for the use of the individual or entity to whom they
        are addressed. If you have received this email in error please
notify
        the email administrator - [log in to unmask]


****************************************************************************
****