Subject: | |
From: | |
Reply To: | |
Date: | Mon, 7 Aug 2000 11:19:08 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
My understanding is that a RS (reset) starts by zeroing memory, then
continues with the restart. A TC (Transfer control) merely skips the
zeroing part. So if the RS takes 45 minutes, the TC should take 45
minutes minus a fraction of a second.
If you are performing a dump, then RS will zero out everything in memory
making the dump useless. Use a TC in that case.
If you are rebooting the system, use a RS to zero out memory, just in
case something in the OS is assuming that memory is initially zeroed.
Steve
On Mon, 7 Aug 2000 09:09:05 -0500 (Central Daylight Time), Jean Huot
<[log in to unmask]> wrote:
>I had a 957 cpu powered off accidently when for some reason it happened what I put the power plug on to a DDS1 drive.
>
>It usually takes 45 minutes to reboot the system when it does a memory self-check.
>
>So to save time I tried TC (which I recall does not do a memory self-check), however the system did not come back on, so I opted for RS. Could it be that TC (warmstart) is only good when there is no power failure?
>
>
>Jean Huot
>Northern Credit Bureaus Inc.
>
|
|
|