Tracy,
Nobody on site knows enough to play with this area, and even I am getting pretty rusty now. The battery going bad is very possible, so we will try booting from .5 and see.....
Regards,
John Pitman
-----Original Message-----
From: Johnson, Tracy [mailto:[log in to unmask]]
Sent: Tuesday, 9 November 2010 8:42 AM
To: John Pitman; [log in to unmask]
Subject: RE: [HP3000-L] dead ldev 1 K959-400
It "could" be possible LDEV 1 was changed from 10/4/24.6 to 5 and
someone forgot to tell the boot loader, but doubtful.
Or it "was" changed but the internal batteries went bad and it defaulted
back to 6.
If that was the case you can "try" booting from 10/4/24.5. (The worst
thing it can tell you is "no".)
Tracy Johnson
Office 1-757-766-4318
[log in to unmask]
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of John Pitman
> Sent: Monday, November 08, 2010 4:27 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] dead ldev 1 K959-400
>
> SEA gives
>
> P0 10/4/0.1 lan
> P1 10/4/20.0 seq acc media (tape)
> P2 10/4/24.5 random acc media
> (ldev 2 ?)
> P3 10/4/24.6 random acc media (ldev 1?)
>
> With
> WARN A008
>
>
> PA gives
>
> Primary boot: 10/4/24.6 (dec)
> Alt boot: 10/4/20.0
> Console 10/4/0.0
> Keyboard 10/12/7.0
>
> With
>
> WARN 80F5
>
> Regards,
>
> John Pitman
>
> -----Original Message-----
> From: Dan Cossey [mailto:[log in to unmask]]
> Sent: Tuesday, 9 November 2010 8:23 AM
> To: John Pitman
> Subject: RE: [HP3000-L] dead ldev 1 K959-400
>
> What shows on a search (SEA)
>
> Dan
>
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf
> Of John Pitman
> Sent: Monday, November 08, 2010 2:17 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] dead ldev 1 K959-400
>
> We have a k959-400 (on 7.5) in Penang, and after a proper
> power down we seem
> to have lost a disc - startup gives WARN A008 - which I think
> translates to
> no bootable device found.
> SEA gives what looks like correct, and PA also looks OK. This
> doesn't prove
> anything about drive condition does it? I would be very
> surprised if there
> is a SCSI issue...?
>
> How will the recovery here differ from the case of a dead
> ldev 2 - no ldev 1
> to install onto ? I have an SLT, there should be another on
> site, and data
> backups. Our other K959 has a 4.5gb ldev 1 and a 9.1gb ldev 2
> - if this one
> is the same, there shouldn't be any issue with replacing the
> 4.5 with a
> 9.1gb should there?
>
> Now that I look at the other K959, the IO list shows
> ldev1=ST34573N and
> LDEV2 as ST39175LC, but discfree shows both with a device
> size of 35547040,
> which looks like 9gb to me.....
>
> Thanks all
>
> Regards,
>
> John Pitman
>
> CAUTION: This message may contain privileged and confidential
> information
> intended only for the use of the addressee named above. If
> you are not the
> intended recipient of this message you are hereby notified
> that any use,
> dissemination, distribution or reproduction of this message
> is prohibited.
> If you have received this message in error please notify RYCO
> Hydraulics
> Pty. Ltd. immediately. Any views expressed in this message
> are those of the
> individual sender and may not necessarily reflect the views of RYCO
> Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
> CAUTION: This message may contain privileged and confidential
> information intended only for the use of the addressee named
> above. If you are not the intended recipient of this message
> you are hereby notified that any use, dissemination,
> distribution or reproduction of this message is prohibited.
> If you have received this message in error please notify RYCO
> Hydraulics Pty. Ltd. immediately. Any views expressed in this
> message are those of the individual sender and may not
> necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
