With the ENFORCE LOGON UDCS set to OFF it does exactly what it says,
allows you to logon with PARM=-1 and not run the logon UDC's. All
showcatalog does is examine the COMMAND.PUB.SYS which will show the
UDC's still set for the system, account, user although not executed.

If it didn't work that way then that could cause another issue whereby
you wouldn't know what UDC's to unset if you're stuck with a security
locked system.

Nige... 

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Bruce Collins
Sent: 15 May 2006 18:29
To: [log in to unmask]
Subject: Re: [HP3000-L] HELLO Command with PARM=-1

I would think that you want ENFORCE LOGON UDCS set to OFF, since what
you are trying to do is bypass the logon udcs with the parm=-1.

Do you have SM capabilities in the user/account that you're logging on
to?

Bruce

----- Original Message -----
From: "Greg Terterian" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, May 15, 2006 12:16 PM
Subject: Re: [HP3000-L] HELLO Command with PARM=-1


> First of all, thank you to all who responded.  I did check the 
> configuration
> in SYSGEN and as most of you suspected the ENFORCE LOGON UDCS was  set
to
> OFF.  However, after I turned ON and restarted the system, it still
does 
> the
> same thing (when I sign on with PARM=-1, it still displays the banners

> and still
> activates the UDCS...)
>
> Thanks in advance
> Greg Terterian
>
> Here is the config and what I did afterward.
>
>
>
> misc> SHOW SY
>
> SYSTEM command           parameter            VALUE
> -----------------       -----------          -----
> USER  VERSION            userversion           C.70.00
> LOGON  PROMPT            logonprompt          MPE/iX:
> CI  PROMPT               ciprompt              :
> RELEASE                                      C.70.00
> ENFORCE LOGON UDCS      enforcelogonudcs     ON  <<<<***(it was  OFF..
I
> turned it ON and than restarted the system, but still the same 
> thing...)***>>>
> misc> EXIT
> sysgen> EXIT
> PUB.HS61:HELLO  MANAGER.SYS;PARM=-1
> CPU=8. Connect=1. MON, MAY 15, 2006,  9:12  AM.
> ENTER USER (MANAGER) PASSWORD:
>
> HP3000  Release: C.70.00   User Version: C.70.00    MON, MAY 15, 2006,

> 9:12
> AM
> MPE/iX  HP31900 C.39.06  Copyright  Hewlett-Packard 1987.  All rights
> reserved.
> PUB.SYS:SHOWCATALOG
> UDCX.PATCHES.SYS
> B                  USER
> UDCNET.NET.SYS
> START              ACCOUNT
> STOP               ACCOUNT
> UDCSYS2.PUB.SYS
> SETUPVAR           SYSTEM
> CHGROUP            SYSTEM
> TAPE               SYSTEM
> LJ                 SYSTEM
> EXPAND             SYSTEM
> J                  SYSTEM
> S                  SYSTEM
> E                  SYSTEM
> LK                 SYSTEM
> C80                SYSTEM
> C132               SYSTEM
> SPRINT             SYSTEM
> PR                 SYSTEM
> SO                 SYSTEM
> LJNAMEDT           SYSTEM
> LJNAME             SYSTEM
> DJNAME             SYSTEM
> CO                 SYSTEM
> PUB.SYS:HELP START
> User-defined command:
>
> start
> option list
> NETCONTROL START;NET=LAN1
> NETCONTROL  START;NET=LOOP
> NSCONTROL START
> PUB.SYS:
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
> 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *