No need to remove the line printer configuration (I assume this is your LDEV 6?)
-- you still need an LP device class.
When you start your system, do, ":SPOOLER LP;OPENQ", either in your SYSSTART
file or from a logon UDC or as a manual step. This will allow the LP device to
allocate spoolfiles and jobs to allocate $STDLIST.
To create DADCONF, assuming your network is properly configured, stream the job,
JCONFJOB.NET.SYS, and wait for a successful completion message on the system
console. You may need to do a =SHUTDOWN, and START NORECOVERY, afterward -- I
don't recall. You could first try starting your network immediately to see if
it comes up OK.
----
Lee Gunter The Regence Group
Supervisor, TRG HP/MPE Systems 503.375.4498
----
Opinions expressed are solely mine.
From: Raymond Cotton <[log in to unmask]> on 09/24/99 01:56 PM
Please respond to [log in to unmask]
To: [log in to unmask]
cc: (bcc: Lee Gunter/BCBSO/TBG)
Subject: [HP3000-L] [Fwd: HPIB]
--
Best Regards
Ray Cotton
Business Consultant
Message-ID: <[log in to unmask]>
Date: Fri, 24 Sep 1999 21:35:37 +0100
From: Raymond Cotton <[log in to unmask]>
Reply-To: [log in to unmask]
Organization: Ray Cotton Business Services
X-Mailer: Mozilla 4.04 [en]C-NECCK (Win95; I)
MIME-Version: 1.0
To: listserver <[log in to unmask]>
Subject: HPIB
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi,
Just purchased a used hp 922 to do some work on, no manuals.
The grey matter also died when it is HPIB, still it works, however as i
donot have a line printer, dev 6 is stopping the spoolfiles and jobs
don't log on.
Also i donot have a DTC, I do not need one.
How can I spoof the line printer.. Can i remove it in sysgen safetly.
Is there some how i can create a DADCONF.net.sys file, the network needs
it when i do nscontrol start..
--
Best Regards
Ray Cotton
Business Consultant
|