Right, different dtc. I can reset the appropriate one...

On 3/25/11, Johnson, Tracy <[log in to unmask]> wrote:
> I presume this HP3000 uses a different DTC than the one that works?
>
> In other words, both HP3000s are not sharing the same DTC?  (My
> situation).
>
> Presuming the configuration is correct in NMMGR (or OpenView) it sounds
> like you have to reset that DTC.
>
> Tracy Johnson
> Office 1-757-766-4318
> [log in to unmask]
>
>
>> -----Original Message-----
>> From: HP-3000 Systems Discussion
>> [mailto:[log in to unmask]] On Behalf Of Mark Landin
>> Sent: Friday, March 25, 2011 12:29 PM
>> To: [log in to unmask]
>> Subject: [HP3000-L] LPQ 1200 showing "Framing Error"
>>
>> I have an LPQ 1200 showing a framing error connected to a DTC16MX. The
>> printer produces no output. The printer works when connected
>> an another 3000
>> configured similarly.
>>
>> Both the printer and the DTC port are set to
>> 19200/none/8/1/Xon-Xoff. Are
>> there other potential sources of framing errors besides
>> mismatch on those
>> parameters? Could it be a cabling issue? Something else?
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

-- 
Sent from my mobile device

"He's old enough to know what's right and young enough not to choose
it. He's strong enough to win the world and weak enough to lose it." -
Neal Peart

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *