I left so many important details out.

The printer is a Laserjet 4100.
I have not tried pinging the printer. I shall try that later today.
I asked the network engineers who connected the hardware if a gateway needed
to be configured on the server, and was told it is not necessary for a
printer. Is this correct? There is a gateway configured for the other remote
location.
I'm not sure what a routing table is, or where it is. Is it in NMMGR?
The hardware is connected like this:
Printer  - - - - - Hub - - - - - DSL modem - - - - - Pacific Bell

Thanks for your help

Harmik Minassian
Advanced Digital Services Inc
Los Angeles CA


"Harmik Minassian" <[log in to unmask]> wrote in message
news:RpeZ7.2422$Vz3.350921@newsread2.prod.itd.earthlink.net...
> We have a remote network printer that has a fixed public IP address and is
> connected to the server using a DSL line. Printing to this printer works
> from NT but not from HP3000. My question is, does the configuration of
this
> particular printer in NPCONFIG need to be different under these
> circumstances?
>
> The NPCONFIG file is similar to the listing below. The device starting
with
> 63 is the DSL connected remote printer. When a spool file is sent to it,
it
> disappears, and a warning message is displayed on the console to the
effect
> that page level recovery will not be performed on this spool file.
>
> Some of the other printers, which are at another remote location, are
> connected by a T1 line and work fine.
>
>
> Thanks for any help
>
> Harmik Minassian
> Advanced Digital Services Inc
> Los Angeles CA
>
>
> global (setup_file = HPNULL.HPENV.SYS      # LaserJet setup file.
>         banner_trailer = FALSE               # Only need a header page.
>         pjl_supported = FALSE
>         jam_recovery = FALSE)
>
> 100    (network_address =  192.123.123.1)        # PRINT1A
> 101    (network_address =  192.123.123.2)       # PRINT2A
> 102    (network_address =  192.123.123.3)       # PRINT3A
> 103    (network_address =  63.321.321.199)      # PRINT4A
> 104    (network_address =  192.123.123.4)       # PRINT5A
> 105    (network_address =  192.123.123.5)       # PRINT6A
> 106    (network_address =  192.123.123.6)       # PRINT7A
> 107    (network_address =  192.123.123.7)       # PRINT8A
> 108    (network_address =  192.123.123.8)       # PRINT9A
> 109    (network_address =  192.123.123.9)       # PRINT10A
>
>
>
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *