You are probably using "Linus" tape (CS80) such as a HP9144.
Bob J. -- Ideal Computer Services
> On August 31, 2020 4:53 AM ED SHARPE <[log in to unmask]> wrote:
>
>
> nooooooo!!!!!!!!!!!!!!!!!! the large cartridge tapes for the mighty mouse series 37!!!!! but those little ones gt gooey too In a message dated 8/30/2020 11:29:21 PM US Mountain Standard Time, [log in to unmask] writes:
> Are these the tapes of which you speak?
>
> https://www.youtube.com/watch?v=wuMBOiwPnOg
>
> (Same guy that did the 2645 terminal in 4 parts.)
>
> On 8/30/20 11:57 PM, ED SHARPE wrote:
> > Ok I have a 37 here sort of..
> >
> > 1 - I have ..cartrige tape drive trashed tapes with black goo..
> >
> > 2 - I have a ds,drive but no bootable media
> >
> > 3 - I have 9 track fos,tapes and my old back up tapes but no working 9 track
> >
> >
> > Ed
> > On Sunday, August 30, 2020 Gavin Scott <[log in to unmask]> wrote:
> > Hi Ed,
> >
> >
> > If you can extract the source code in any text format then that's easy to get on to the system and compile and/or update if it's written for an earlier MPE tables layout etc. If you have binary files on a real 3000 then you can use Reflection to download then in ;LABELS format and I can upload them from that. My Series III does not currently have a good PCLINK2.PUB.SYS, but I have found one since I packaged it up that will be in the next version or I can send it as a SIMH tape to anyone who needs it.
> >
> >
> > Otherwise, there are a few people who can convert physical tapes into SIMH format tape images that can then be :RESTOREd into the simulated environment. I believe Stan provided the tools needed to do this in the ALLEGRO account in my setup, so it could be possible to use say Refelction to transfer that to a real 3000 with a tape drive and do the conversion from physical tape to virtual tape there. I have not tried this myself so I don't know how much work it would be to set up.
> >
> >
> > The Series III simulator should simulate the hardware to the level required for PEEKABOO to work I think.
> >
> >
> > Gavin
> >
> > On August 30, 2020 at 6:11 PM, ED SHARPE <[log in to unmask]> wrote:
> >
> >
> > anyway the upshot of the peekaboo if i can get stuff off these tapes there is a copy of peakaboo on it does the emulator have the series III posts on it in simulated fom/driver? ed sharpe
> >
> > In a message dated 8/30/2020 11:38:12 AM US Mountain Standard Time, [log in to unmask] writes: I had forgotten about PEEKABOO also. I looked around and don't see it anywhere. IIRC, it may have only worked on ATC ports on a Series II/III or at least wasn't commonly available on the HP-IB systems so it may be pretty rare as collectibles go.
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> --
> Tracy Johnson
> BT
>
>
>
>
>
>
>
> NNNN
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
