Steven,

You can not boot from the VA7100 through the SA40.
 
Sorry, I have even tried to work with Crossroads on this, to no avail.  They did not seem interested in fixing the problem.
 
I sent plenty of SCSI traces.... I don't think it was a priority for them.
 
In the configurations I have done, I use a Mod20 for the system volume set.
 
-Craig
 


Steven Waters <[log in to unmask]> wrote:
We are configuring an SA40 SCSI to fiber switch to allow our 989 to 
connect to a VA7100 disk array. Everything seems to be working fine 
execept for that fact that we cannot boot from the VA7100. We get a 
message "Error returned from boot device driver. STATUS returned from 
driver = -4". The INSTALL command worked fine, but we did note a 
message "WARNING. Disk not MPE/iX disk." at the start of the INSTALL. 

When we run ODE MAPPER the drives are there.

Does anyone have an idea of what may be wrong?

Thanks,

Steven Waters
1-800-387-1269

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

		
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort. 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *