Subject: | |
From: | |
Reply To: | Johnson, Tracy |
Date: | Tue, 24 Jun 2003 07:40:33 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You can probably find a ten-dollar transciever to
run off the AUI port into you twisted-pair network.
BT
Tracy Johnson
MSI Schaevitz Sensors
> -----Original Message-----
> From: Bob J. [mailto:[log in to unmask]]
> Sent: Monday, June 23, 2003 11:58 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] dtc 72mx
>
>
> Look closely at the RJ45. You are probably connecting
> to the (serial) diagnostic port which is NOT a network
> connection. The network connections are AUI and BNC.
>
> Bob J. -- Ideal Computer Services
> http://www.icsgroup.net
>
>
>
> Larry Simonsen wrote:
> >
> > i have a dtc 72mx which is connected to the network via the
> aui port. i
> > would like to change this to use what appears to be the
> rj45 connector. i
> > tried just switching the cable and power cycling the dtc
> but the switch
> > does not show a link light for the connection. is there a
> jumper on the
> > card?
> > what more is there to do?
> >
> > -------------------------------------------------
> > Larry Simonsen Phone: 801-437-3737
> > Flowserve Corporation Fax: 801-491-1750
> > 505 E. Technology Ave http://www.Flowserve.com
> > Bldg. C, Suite 3100 e-mail: [log in to unmask]
> > Orem, UT 84097
> > -------------------------------------------------
> > All opinions expressed herein are my own and reflect, in no
> way, those of
> > my employer.
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|